The CDTI Innovation seeks Spanish companies to develop with South Korea recyclable thermoplastic composite materials reinforced with carbon fiber

The initiative seeks to develop carbon-fiber-reinforced thermoplastic composites and high-speed forming and bonding technologies to manufacture lightweight structures for drones, robots and civil industrial applications.

Búsqueda de socios Corea del Sur 18nov26
The project seeks to promote the circularity of carbon fiber composite materials

The Korean companies YGM Co., Ltd. and TANI are looking for Spanish companies to collaborate on an R&D project focused on the development of recyclable carbon fiber thermoplastic composites (CFRPs) and high-speed forming and bonding technologies for lightweight civilian structures.

The project responds to the limitations of thermostable carbon fiber composite materials, especially those related to their end-of-life recycling and long production cycles. Faced with these limitations, it is proposed to develop carbon-fiber-reinforced thermoplastic composite materials that can be recycled or reprocessed, as well as faster industrial manufacturing methods.

The intended applications include lightweight drone components, robots and mobility systems, which require reproducible forming processes, durable bonding methods, dimensional stability and cost-effective repair solutions, as well as adequate structural performance. The project will allow the validation of light recyclable materials and components for civil applications. Military or ballistic uses are expressly excluded from its scope.

 

Experience and capabilities of Korean companies

YGM Co., Ltd. is a Korean SME with experience in engineering ultra high molecular weight polyethylene (UHMWPE) light panels and composite materials, maritime structures and product and system integration. Its R&D and structural engineering capabilities will support project coordination and management.

For its part, TANI specializes in the design, molding, machining and repair of carbon fiber composite materials (CFRP), modular carbon fiber structures, prototypes of removable or foldable rescue stretchers and light products, such as drones and robots. His expertise in CFRP component design and prototyping will be complemented by YGM’s capabilities in lightweight composite structures and development management from South Korea.

The collaboration with Spanish partners will be necessary to incorporate technologies specialized in continuous fiber thermoplastic prepregs, high-cadence forming processes and welding techniques, among other capabilities.

 

Technical development and planned activities

The project includes six work packages ranging from the definition of the requirements of the components to the manufacture and validation of demonstrators:

  • WP1. Definition of requirements: establish the mechanical, economic, cycle time, sustainability and dimensional stability requirements for representative structures of robots and civil drones, as well as industrial protection housings.
  • WP2. Material selection: select recyclable thermoplastic matrices, such as PA, PP, PPS or other technically justified systems, and carbon fiber reinforcements. Combinations of virgin and recycled materials, retention of fiber length, crystallinity and thermal stability will be studied.
  • WP3. Design and forming: design consolidated laminates from unidirectional tapes and organic sheets, and develop process windows for rapid thermoforming, compression consolidation or overmolding. The aim is to obtain repeatable components and with low porosity.
  • WP4. Joining technologies: develop induction, resistance or ultrasonic welding technologies, as appropriate, as well as hybrid adhesive and fastener bonds. Connection designs that facilitate disassembly will be studied, in addition to the strength of the joints, their behavior against takeoff and fatigue.
  • WP5. Circularity and reprocessing: evaluate the reuse and reforming of materials, as well as the use of raw materials from recycled fiber in representative components. Property retention, mass balance, waste generated, energy consumption and cycle times will be quantified, in addition to environmental considerations.
  • WP6. Demonstration and validation: manufacture and test at least two demonstrators for civil applications: a lightweight structure for a robot or drone and a functional industrial housing or box or a modular panel. Progress will also be made towards testing with original equipment manufacturers (OEMs) and industrial-scale production.

The project establishes four quantified objectives. On the one hand, reduce the weight by at least 25% with respect to a functionally equivalent metal reference; secondly, reduce the production cycle time by at least 20% with respect to an agreed reference value; thirdly, preserve at least 80% of the key mechanical properties after a defined reprocessing route and, finally, manufacture a minimum of two demonstrators.

 

Profile of Spanish companies and entities

To carry out the project, YGM and TANI seek to constitute a Spanish consortium that gathers complementary industrial and technological capabilities in five areas:

  • Semi-finished materials of thermoplastic CFRP: industrial knowledge in unidirectional tapes of continuous fiber, organic sheets, hybrid laminates preimpregnated or consolidated and dimensioning of interfaces for PA, PP and PPS matrices. The experience in consolidating materials with low porosity and selection of recycled fiber reinforcements will also be valued.
  • Fast forming with temperature control: equipment and process models for forming by stamping or compression moulding; heating of blanks; automated handling; thermal management of tooling; pressure and cooling profiles; control of crystallinity and deformation, and reduction of production cycles.
  • Joining and structural welding: qualification of induction, resistance or ultrasonic welding technologies, adapted to the selected matrix and geometry; activation of surfaces, overmolding, inserts and hybrid adhesive or screwed joints. Peel and fatigue resistance, as well as environmental durability, will also be studied.
  • Circularity and repair: development of validated reconsolidation and reforming processes; classification and characterization of recycled fibers; evaluation of retained properties after reprocessing; patch or solder repair strategies; waste management, traceability and life cycle analysis (LCA).
  • Engineering validation and pilot scaling: finite element simulation (FSM) of fiber orientation and formation; structural impact, fatigue and shock models; non-destructive testing (NDT); statistical process control; pilot scale manufacturing; productivity and cost modeling; and qualification experience of European original equipment manufacturers (OEMs).

The desired Spanish consortium must have the following profiles:

  • Spanish manufacturer of medium or large size thermoplastic compounds or industrial integrator, which will exercise industrial leadership in Spain and coordinate the industrialization of materials and processes based on thermoplastic CFRP. It must make available facilities for pilot forming and automated handling, as well as develop tooling and process specifications, control plans and a cost and performance model suitable for original equipment manufacturers (OEMs).
  • Spanish technological SME, which supplies intermediate materials, such as unidirectional tapes (UD-tape), reinforced thermoplastic sheets (organosheets) or recycled carbon fibers, integrates compatible welding, overmolding or hybrid fixing solutions, manufactures test specimens, joints and pilot parts and establishes viable repair and reforming procedures.
  • Spanish research or testing centre, whose participation will be optional. Entities capable of characterizing melt rheology, thermal transitions and crystallization, dispersion and orientation of fibers, void fraction, joint integrity and interlaminar behavior, against impacts and fatigue, will be evaluated. They will also be able to assess property retention in recycled materials and provide reproducible testing protocols.

In addition, the consortium will have to rely on the collaboration of European original equipment manufacturers (OEMs), whether in the field of industrial robots and drones or light industrial structures. These manufacturers will be involved in defining requirements and acceptance criteria for prototypes and conducting pilot tests. Applicable regulatory obligations, including those relating to the REACH Regulation and recycling, as well as product-specific conformity requirements, will also be analysed without presupposing a certification.

 

Distribution of responsibilities and expected results

The distribution of responsibilities among the partners includes the Spanish industrial and technological leadership in the development of materials and processes, together with the coordination and demonstration activities of Korean companies.

In Spain, the main industrial partner will lead the industrialisation of CFRP’s thermoplastic materials and processes and coordinate the consortium’s activities in Spain. The Spanish partners will assume the leadership of the works related to semi-finished thermoplastic materials, fast forming, welding technologies and circularity methodology (WP2-WP5).

On the South Korean side, YGM will lead project governance, integration of composite material structures and test management. The TANI company will be responsible for the design of the target parts, the assembly of the prototypes and the demonstrations before Korean customers. It also envisages the possible involvement of Korean research institutes to support material testing and production engineering.

Expected results and deliverables include at least two candidate materials, a documented range of parameters for high cadence forming, qualified bonding and repair specimens, process data, and an evaluation of recycled or reprocessed materials. The project should also provide two validated demonstrators, an industrial scaling plan between Korea and Europe and a strategy for managing the intellectual property generated.

The proposal is aimed at its presentation to the call KSSP 2026-2027 of the Spain-Korea Strategic Plan, whose deadline for submission will remain open until January 28, 2027.

 

Contact

For additional information on the technical scope of the proposal and the role of the Spanish company, interested entities can contact Dr. Jong Wook Lee (jwlee@ygmarine.co.kr) directly.

 

CDTI Innovation

The Center for Technological Development and Innovation, CDTI E.P.E. It is the innovation agency of the Ministry of Science, Innovation and Universities, whose objective is the promotion of technological innovation in the business environment. The mission of the CDTI is to ensure that the Spanish business fabric generates and transforms scientific and technical knowledge into globally competitive, sustainable and inclusive growth.

 

More information:

Press Office
press@cdti.es
91-581.55.00

On the Internet
Website: www.cdti.es
On Linkedin: https://www.linkedin.com/company/29815
On X: https://x.com/CDTI_innovacion
On Youtube: https://www.youtube.com/user/CDTIoficial 

This content is copyright © 2026 CDTI, EPE. The use and reproduction is allowed by citing the source and digital identity of CDTI (@CDTI_innovacion).